Note:
The {CAL} indications are accurate only if the Calibration Procedure has been
carried out as described in Appendix A-3.
!º !º CAL Push-Button
!º !º
!º
Fixes the monitor level to the current calibration setting. The knob is not
operational when {CAL} is selected.
!¡ !¡ DIM Push-Button
!¡ !¡
!¡
Dims all monitor LS outputs according to the dim level setting. Operates
in parallel with the {DIM} button on the Monitor panel.
!™ !™
!™ !™ CUT Push-Button
!™
Cuts all the Monitor LS outputs. Operates in parallel with the {CUT} button
on the Monitor panel.
.
Chapter 6 Technical Descriptions
6-85