Table of Contents
Advertisement
5-2 Channel Screens
5-20
Chapter 5 Control Screens
CHANNEL FAST INSERTS pop-up
Assigning CHANNEL INSERTS
The 8 blocks towards the bottom of the GUI entitled INSERTS, each with
5 fields (the title is a useable field too), are used to set up channel inserts.
Inserts can be set up in two ways, using the pre-assigned FAST INSERTS
via the upper field or by setting each item individually using the other
fields.
FAST INSERT – Upper field
Clicking on the upper INSERTS field gives access to the FAST INSERTS
pop-up. Each selection can have a pre-assigned input, output and
appropriate name. These are set up via the PREF (Preferences) GUI
described later in this chapter.
Click on the desired device name in the pop-up and its input and output
will be connected simultaneously. The I/O device names will be displayed
in the second and third fields and the actual device name will be displayed
in the fifth scribble field. Selecting INSERT at the INPUT CHANNEL &
INSERTS panel will display the device name in the dot character display.
Once actioned as a Fast Insert, the assignments to the other fields can be
edited or set up on an individual basis as follows:
INSERT SEND – Second field
The second field is used to specify an I/O destination for the selected
channel Insert Send. Click on this for the pop-up displaying possible
Advertisement
Table of Contents
