Table of Contents
Advertisement
7-6-8 Snapshots, Copy & Link Screen
SNAPSHOTS, COPY & LINK GUI displaying the Snapshot DEFAULTS
General
This screen has three pages allowing control of
Snapshots, Copy and Link functions. Click on the
heading bar for the page required.
Snapshots may be saved ranging from the full system
down to a minimum of 1 channel. However,
Snapshots may be loaded down to component sections
of channels, depending on the Snapshots DEFAULTS
selector. Snapshots for elements such as EQ and
Dynamics may be loaded individually to their original
channel or any number of other channels. For COPY
and LINK, there are separate sets of defaults related to
the copying and linking of settings from one channel to
one or more others.
DEFAULTS block
The availability of buttons in the DEFAULTS block
layout will change depending on whether the current
operation is SNAPSHOTS, COPY or LINK.
Click on the appropriate buttons to highlight in orange
the channel sections required, such as EQ and
Dynamics. Click on ALL to highlight the complete
channel then de-select the sections not required or, if
more convenient, click on NONE to de-select all
sections and then click on the ones required.
Chapter 7 Session Management
7-49
Advertisement
Table of Contents
