Maintenance Information Read Write - Sony SRP-X500P Interface Manual

Digital powered mixer, rs-232c interface manual

Hide thumbs Also See for SRP-X500P:

Table of Contents

2.3.2 MAINTENANCE INFORMATION READ WRITE : 0x43 0x4D 0x49

0x31 ('CMI1')

This command is used to enter information in the 256-byte readable/writable area in the maintenance information

memory of the SRP-X500P.

You can use this area to enter information such as the room name and the date and time when the SRP-X500P

was set up.

Packet format

0x43 0x4D 0x49 0x31

♦ Parameter

The parameter consists of 256 bytes of data in the order shown in the following table.

Byte

1st-256th

•

MAINTENANCE INFORMATION READ WRITE

Specify up to 256 bytes of ASCII code as the information to be entered.

Note

If the information does not reach the 256 bytes, be sure to fill the blanks with the space (0x20).

Example

To enter "SRP-X500P□ROOM□No.1"

0x43 0x4D 0x49 0x31 0x53 0x52 0x50 0x2D 0x58 0x35 0x30 0x30 0x50 0x20 0x52 0x4F 0x4F 0x4D 0x20

0x4E 0x6F 0x2E 0x31 0x20 0x20 0x20 0x20 0x20 0x20 0x20 0x20 0x20 0x20 0x20 0x20 0x20 0x20 0x20

0x20 0x20 0x20 0x20 0x20 0x20 0x20 0x20 0x20 0x20 0x20 0x20 0x20 0x20 0x20 0x20 0x20 0x20 0x20

0x20 0x20 0x20 0x20 0x20 0x20 0x20 0x20 0x20 0x20 0x20 0x20 0x20 0x0D

('C M I 1 S R P – X 5 0 0 P □ R O O M □ N o . 1 □ □ □ □ □ □ □ □ □ □ □ □ □ □ □ □ □ □

□ □ □ □ □ □ □ □ □ □ □ □ □ □ □ □ □ □ □ □ □ □ □ □ □ □ □ □ □ □ □ □ □ □ □

□ □ □ □ □ □ □ □ □ □ CR')

"□" indicates a space.

SRP-X500P RS-232C Interface Manual

parameter" 0x0D

Parameter

MAINTENANCE INFORMATION READ WRITE

Page 40/43

Table of Contents