Table of Contents
Advertisement
7-5-5 To Save a Mix
A mix, or part mix, can be saved at any time. So far, the automation data for any cuts has been resident in the
'working mix' and has not been saved to the internal hard drive.
To save a mix
To save a mix for the first time, press {SAVE} {MIX}
{ENTER} on the Control Keyboard. A pop-up dialogue
box will appear for a name entry. Type in an
appropriate name on the QWERTY keyboard or press
{ENTER} once more or click on OK for the default
name, MIX 1. This will appear as the first entry in the
MIXES list. To edit mix names later, either highlight
and click on or press {EDIT} for the name dialogue
pop-up.
If {SAVE} {MIX} {ENTER} is used again, the new
mix will overwrite the previous one, in just the same
way as SAVE works on a word processor.
Mixes & Cues screen
Use {SAVE} {MIX}
overwriting the previous mix. A pop-up will appear
for a new name entry, or press {ENTER} or click on
OK for the next default name.
When a mix is saved, so is the static position of the
complete console. If the mix is recalled at a later date,
everything will be completely reset to its previous
static position, apart from controls which were
automated. Their settings and movements will be
referenced to timecode.
{AS NEW} {ENTER} to avoid
Chapter 7 Session Management
7-19
Advertisement
Table of Contents
