Table of Contents
Advertisement
6-3 Central Section Panels
6-66
Chapter 6 Technical Descriptions
Unlimited strings are possible in the same entry
e.g. 00 . 01 . 03 . 05 .. 08 . 1 .. 24 . 48 .. 56 . 65 =
Main Fader, Control Group Faders 1, 3, and 5-8
Channels 1-24, 48-56 and 65
"UNDO" & "REDO" for Static Settings
{UNDO} Key
{UNDO} used in conjunction with the key labelled SPARE 1 in the
illustration, { } on the Control Keyboard itself, allows the undoing of
static changes, such as knob adjustments and button pushes. Press and
hold { } and then press {UNDO} to undo static changes one at a time.
Up to 256 static changes are held in memory.
{REDO} Key
Holding { } and pressing {REDO} reverses the UNDOs, one at a time
for each press.
{UNDO ALL} Key
Holding { } and pressing {UNDO ALL} once, removes all static
changes in the memory.
{REDO ALL} Key
Holding { } and pressing {REDO ALL} once, reverses the effect of the
UNDO ALL key.
"DELETE" Command Lines
When using DELETE commands, a dialogue box requires confirmation
or cancellation.
{DELETE} {PROJECT} {ENTER}
Deletes the currently highlighted PROJECT, including its TITLES,
MIXES, SNAPSHOTS and CUES.
{DELETE} {PROJECT} # {ENTER}
Deletes the specified numbered PROJECT.
{DELETE} {PROJECT} 1 . 3 . 5 {ENTER}
Deletes PROJECTS 1, 3 and 5.
{DELETE} {PROJECT} 1 . . 5 {ENTER}
Deletes PROJECTS 1-5 inclusive.
Note:
The Command Lines above may be applied in a similar way for deleting Titles,
Mixes, Snapshots and Cues, substituting the appropriate word for PROJECT in
each instance.
{DELETE} {TITLE} {ENTER}
Deletes the currently highlighted TITLE (including its MIXES,
SNAPSHOTS & CUES).
Advertisement
Table of Contents
