Table of Contents
Advertisement
6-2-3 Pans Panel
8
5
4
3
7
6
1 2
Each of the 6 Pans Panels (3 each side of the control surface) contains 8
definable knobs, with associated electronic dot display, AFL and CUT
buttons. Although the primary purpose of these knobs is panning, their
functions may be defined. Any pan or gain function may be selected at the
SELECT TO PANS panel. Channel SEND/RET(urn) monitor selection,
RECORD remotes and ACCESS buttons are also present on this panel.
Use the SELECT TO PANS panel to control:
• PAN
Left/Right Pan for all occasions where the Fader
Output is feeding a Stereo Bus or Front Surround
• INPUT GAIN
Gain of Mic, M/T Return & Line
• GROUP TRIM
Gain of M/T Bus Output to M/T channel
• M/T MON
Level sent to Independent M/T Monitor Bus
• M/T SEND
Level sent to M/T Bus
• CHANS
Controls the Level to the Main Output Bus
• SENDS 1 (-24)
Levels sent to Effects & Foldback Busses.
Pans panel
Chapter 6 Technical Descriptions
6-13
Advertisement
Table of Contents
