Table of Contents
Advertisement
6-3 Central Section Panels
6-44
Chapter 6 Technical Descriptions
1
6
CENTRE SECTION METERS
The meters in the centre section consist of two sets of 8 stereo meters, one
set each side of a central stereo meter. They can be switched to monitor a
number of sources and their function can also depend on whether the Main
Output Bus is set for Stereo or Surround operation.
Left set of 8 Meters
The left hand 8 meters will display the output levels of SSGs 1-16 and
Sends 1-24 according to the meter selector described later in this section.
This is irrespective of whether Stereo or Surround is in operation.
Central Stereo Meter
The signal source for the Central Stereo Meter is set as follows:
• MAIN Push-Button selected
Can indicate the L and R signals from the Main Output Bus or L and R
from the Fold-Down Matrix. This option is set in the PREFERENCES
GUI described in section 5-2-5.
• FOLLOW MONITOR Push-Button selected
Indicates the L and R signals from the Main Output Bus or the L & R
signals selected as monitor sources for the CR Monitor LS.
Right set of 8 Meters
The sources for the right hand 8 meters depend on whether the Main
Output Bus is set for Stereo or Surround:
• Stereo Main Output
Indicate output level for SSGs 1-16 and Sends 1-24 according to the
meter selector described later in this section.
• Surround Main Output
Indicate output levels for the Main Output Bus
1 MAIN Push-Button
Depends on whether the Main Output Bus is set for Stereo or Surround.
3
4
5
2
8
7
Advertisement
Table of Contents
