To Assemble A Mix - Sony OXFORD Operation Manual

7-5 Mixing Overview

7-5-12 To Assemble a Mix

The MERGE/ASSEMBLE GUI allows Mixes and Snapshots from any source to be merged with the current
Working Mix. Each bar in the GUI represents a Mix Layer and these may include additional Dynamic Layers.
1
Select the ASSEMBLE softkey at the bottom of
the central LCD and a time-line GUI will display
the current Working Mix as a bar along the bottom
of the screen. Individual bars for each unsaved
Dynamic Layer will also be displayed. Any New
Dynamic Layers will appear after creation, once
the tape is put into rewind.
2
To add a new layer from a previous Mix or
Snapshot click on ADD LAYER to view the pop-
up on the next page. Extensive options are
available but a simple case will be described in this
overview which involves copying mix data within
a Title from Verse 1 to Verse 2.
7-24
Chapter 7 Session Management
MERGE/ASSEMBLE screen
3
Select the source data using the upper section of
the GUI. The default source is the current Artist/
Project, Title and its Working Mix. The mix data
for Verse 1 is already resident in the Working Mix
so this is the correct source mix for this example.
Any other source can be selected by clicking on
the appropriate $ to the right of its name strip for a
pop-up list.
4
Having established the correct source, set a start
time for the source data in the SOURCE
'FM'section which may be a Cue point or
timecode entry. 'VERSE 1' is displayed in the
example. Click on $ to the right of the name strip