Table of Contents
Advertisement
7-6 The Session Management™ Screen Pages
Command Dialogue
At the base of the screen, the User Command Dialogue
Line bar displays commands from the dedicated
Control Keyboard and QWERTY Keyboard for
confirmation before {ENTER}. There are command
line merge functions available alongside the GUI-
based assemble described previously.
MERGE command lines
The merge mix automation data command lines allow
specified parts of a saved mix or a snapshot setting to
be merged into the current working mix. The
parameters which can be specified are:
• which CHANNELS
• which CONTROL GROUP FADERS
• which MIX (including the current working mix) or
SNAPSHOT source
• START and END Times from the source mix
• DESTINATION Times for time-shifted merge
• BUTT or RAMP for the merge mix sections
• joining of Static Objects to other Static Objects
The UNDO and REDO functions will work on any
merge operations in the normal way.
The constituents of a merge command are as follows:
{MERGE}
{MERGE}
{MERGE}
{MERGE}
{MERGE} key on the Control Keyboard.
1
2 Source:
Nothing specified, uses current WORKING MIX
{MIX} = Currently highlighted MIX
{SNAPSHOT} = Currently highlighted SNAPSHOT
3 List or Range of Channels or other Faders:
1..108
= Channels 1-108
01..032 = Control Group Faders 1-32
00
= Main Fader
4 Start Time for Source Data:
{A}, {B}, Cue, Cue # or Timecode number entry
5 End Time for Source Data:
{A}, {B}, Cue, Cue # or Timecode number entry
6 Optional Shifted Destination Start Time:
{A}, {B}, Cue, Cue # or Timecode number entry
{ENTER}
{ENTER}
{ENTER}
{ENTER}
{ENTER}
7
Note:
1 Channel data will be merged according to the
control types highlighted in the SNAPSHOT
DEFAULTS.
7-44
Chapter 7 Session Management
2 Channels and other fader types can be specified in
a single string e.g.
00.01.03.05..08.1..24.48..56.65 =
Main Fader, Control Group Faders 1, 3, 5-8
Channels 1-24, 48-56 and 65.
3 If Timecode number entry is used, {TO} key must be
used as a separator - see example below.
Example MERGE command lines
{MERGE} 1..48 {CUE} 3 {CUE} 6 {CUE} 9
{ENTER}
Adds new automation layer to the working mix that
copies all the moves for channels 1-48 between Cue 3
and Cue 6 to start at Cue 9.
{MERGE} {SNAPSHOT} 1..2 {A} {B} {ENTER}
Adds new automation layer to the working mix that
will switch to snapshot data at {A} and back to existing
data at {B} for channels 1 and 2.
{MERGE} {MIX} 01..032 {TO} 2:00 {TO} 4:00
{TO} 2:01 {ENTER}
Slides the moves on control group faders between 2:00
and 4:00 of highlighted mix to 2:01 on working mix.
Advertisement
Table of Contents
