To Insert Dynamics Pre Multitrack Send - Sony OXFORD Operation Manual

3-10 Basic Console Operations

3-10-8 To Insert Dynamics Pre Multitrack Send

1
1
Press {ACCESS} for the desired Channel.
2
At the Input Channel & Inserts panel, select
'MULTI' in window number 5 using the { + } and
{ – } buttons either side. Select its large { IN }
button to insert the multitrack into the signal path.
3
At the same panel, select 'DYN' in a window
before window 5, window 4 for example, and
select the large { IN } button to insert the dynamics
processor into the signal path before the multitrack.
4
In the Dynamics section, located in the Free
Assign Area, select { IN } buttons for the processing
3-26
Chapter 3 Getting Started
4 6 5 2
5
6
3
required: Gate, Compressor, etc., indicated by 8
character dot displays.
On the LCD screen above the dynamics controls,
press the Dynamics softkey to view the parameters
and transfer curve graph.
The dynamics processing is set and displayed via
definable knobs and switches. Set their functions
via the local {ACCESS} keys according to the
processes in use. Adjust whilst viewing the
settings on the LCD screen. The settings for all
functions are displayed simultaneously.