Table of Contents
Advertisement
6-2 Channels Section Panels
6-16
Chapter 6 Technical Descriptions
3 M/T SEND Push-Button
Allows pans to be switched to control the level sent to M/T bus during
recording.
4 INPUT GAIN Push-Button
Allows pans to be switched to control gain of Mic, M/T Return and Line
Input.
5 GRP TRIM Push-Button
Allows faders to be switched to control the gain of the M/T bus output to
the M/T channel.
6 M/T MON Push-Button
Allows pans to be switched to control the level sent to the independent
M/T Monitor Bus.
7 SHOW VALUE Push-Button
Allows the display of pan positions in degrees or gain/loss in dB on the
pans panel's 6 character dot displays according to the function selected.
Press and hold {SHOW VALUE} and the current input device, e.g. ADC183,
will be displayed for each individual channel.
Note:
It is the 'raw' input device which will be displayed, not the 'alias' name, if one has
been set.
8 SENDS 1-24 Push-Buttons
Allow pans to be switched to control the levels sent to the effects and
foldback busses.
9 Joystick
The joystick surround sound panner is in parallel with the M/T Send Pan.
It allows 2D surround panning in multi-format mode and left/right pan in
stereo mode. Its knob is touch sensitive, indicated by the AUTO REC
push-button lighting when touched.
!º ABS Push-Button
Used to select 'ready absolute' status when automating joystick panning
movements (see Chapter 7).
!¡ TRIM Push-Button
Used to select 'ready trim' status when automating joystick panning
movements (see Chapter 7).
!™ AUTO REC Push-Button
Used to switch the joystick into automation record according to the ABS
or TRM status (see Chapter 7).
Advertisement
Table of Contents
