7-2 Files Hierarchy and Automatable Controls
7-2-2 Automatable Controls
7-6
Chapter 7 Session Management
Controls that can be automated
The following controls can be dynamically automated, but note that the
static settings of all controls are stored alongside dynamic automation data.
• EQ
• Dynamics
• Delay
• MIDI Parameters
• Channel Faders, Control Group Faders and Main Output Fader
• Channel Cuts and Control Group Cuts
• Channel Pans and In/Out Buttons
• Multitrack Pans including Multi-Format Surround Pans
• Multitrack Send Levels and Cuts
• Send Levels, Send Cuts, Send Pans
• The 8 IN Buttons on the Input Channel & Inserts panel
• The A and B Equaliser buttons
• MIC, M/T and LINE Input Selector Push-buttons
• Knobs and Switches Assigned to MIDI Outputs
Note:
The 8 IN buttons allow all channel processes such as EQ, Dynamics and Insert to
be switched in and out of the channel path.