Table of Contents
Advertisement
"CUE" Command Line
{CUE} {ENTER}
Creates a new Cue in the CUES list at the current time for the master
machine. A pop-up appears allowing a name to be assigned to the new
Cue. Click on {ENTER} or click on OK for the next default Cue number or
type in a name using the QWERTY Keyboard first.
"MIX" Command Lines
MIX Command Lines are related to Audition functions within the Mix
Automation. See section 7-7 for details.
Other Command Key Functions
{SELECT MACH} Key
Allows machines other than the Timecode Master to be controlled by the
system Transport Control. Once the {SELECT MACH} key has been
pressed, pressing any Transport Remote button on any machine causes the
system to control that machine until another is selected in the same way.
{JOG} Key
Displays the current Jog function in the Command Dialogue Line and
allows its other functions to be set. See page 6-63 for details.
4 and $ Keys
Are tab and back-tab functions to move the orange highlight around the
various fields within GUIs.
˘, ¿, ≥ and ÷ Keys
Allow the orange highlight to be moved around in the current field.
{TO} & {AS NEW} Keys
Are used specifically in conjunction with other command lines described
previously within this section.
{NOW} Key
Allows the current time point to be set on a timecode pop-up or list entry
which is highlighted orange.
{ + } & { - } Keys
Allow a timecode entry, which is highlighted orange, to be nudged up or
down in frames. This applies to timecode pop-ups too except that the
category to be nudged, hours, minutes, seconds or frames, can be selected
using the ¿ and ÷ keys.
{EDIT} Key
To use the EDIT function, move the orange highlight to the desired entry,
then touch the EDIT key to display a pop-up Dialogue Box.
6-71
Chapter 6 Technical Descriptions
Advertisement
Table of Contents
