Settings For Forwarding From Command Center Rx (Rx/Forward Requirements) - Kyocera TASKalfa 3051ci Operation Manual

FAX Operation (Advanced) > Printing/Sending Received Faxes by Requirements (Memory Forwarding)
Settings for Forwarding from Command Center RX
(RX/Forward Requirements)
You can use Command Center RX on a computer connected to the network to specify the forwarding settings on this
machine.
Refer to the machine's Operation Guide. (8 Setup and Registration (System menu) > System/Network)
Accessing Command Center RX
1
Launch your Web browser.
2
In the address or location bar, enter the machine's IP address or the host name.
Examples: 192.168.48.21/ (for IP address)
MFP001 (if the host name is "MFP001")
The web page displays basic information about the machine and Command Center RX as well
as their current status.
NOTE
When connecting to Command Center RX, a message may appear that reads
"There is a problem with the security certificate of this website". To prevent this
message from appearing, in "Protocol Settings", set "HTTP" to [On], or install the
device certificate of this machine into your Web browser. For details, refer to the
machine's Operation Guide.
3
Enter the user name and password of the administrator, and click Login.
Setting Administrator User Name, and Password restricts general users' access to pages other
than the Start page. For security purposes, setting the Administrator password is highly
recommended. The default Administrator password is factory-set as 'Admin'.
4
Click 'Setting' from the navigation bar on the left to view and set values for that
particular category.
5
Click 'FAX / i-FAX'.
The Transmit Settings dialog box will appear.
For details, refer to the Command Center RX User Guide.
4-29