Kyocera TASKalfa 3051ci Operation Manual page 252

Appendix > Error Code List
Error Code
U05300
U14000
U14100
U19000
U19100
U19300
1101
1102
1104
1105
1106
2101
2102
2103
2204
3101
3201
If an error appears that is not in the list, refer to the machine's Operation Guide.
Reception was rejected by the recipient because communication requirements are not met due to the
reception restriction set on the recipient machine. Check with the recipient.
Reception to the FAX Box was stopped because there is no more free space in the memory of this
machine. Create free space by outputting the data stored in the memory, or cancel the reception to the
Sub Address Box.
Transmission to the FAX Box or sub address box on our-brand recipient machine was stopped
because there is no more free space in the memory of the recipient machine. Check with the recipient.
Memory reception was stopped because there is no more free space in the memory of this machine.
Create free space by outputting the data stored in the memory, and ask the sender to resend.
Transmission was stopped because there is no more free space in the memory of the recipient
machine. Check with the recipient.
Transmission was stopped due to a data error occurring during transmission. Send again.
Failed to send i-FAX.
Check the host name of the SMTP server on the Command Center RX.
Failed to send i-FAX.
Check the following on the Command Center RX.
• SMTP login user name and login password
• POP3 login user name and login password
Failed to send i-FAX.
Check the i-FAX address.
NOTE
If the address is rejected by the domain, you cannot send the E-mail.
Failed to send i-FAX.
Select [On] of the i-FAX settings on the Command Center RX.
Failed to send i-FAX.
Check the sender address of SMTP on the Command Center RX.
Failed to send i-FAX.
Check the network and Command Center RX.
• The network cable is connected.
• The hub is not operating properly.
• The server is not operating properly.
• POP3 server name of the POP3 user
• SMTP server name
Failed to send i-FAX.
Check the network and SMB settings.
• The network cable is connected.
• The hub is not operating properly.
• The server is not operating properly.
Failed to send i-FAX.
Failed to send i-FAX.
Check the authentication methods of both the sender and the recipient.
Failed to send i-FAX.
Check the authentication methods of both the sender and the recipient.
Possible Cause/Action
11-18