Kyocera TASKalfa 3051ci Operation Manual page 194

Internet Faxing (i-FAX) > i-FAX Settings
i-FAX Settings Transmission
Reception
E-mail Send
Settings
After completing the settings, click [Submit] to save the settings.
† When Direct SMTP is used, this must always be set.
†† When Internet FAX is used, this must always be set.
Item
Transmission Type
Direct SMTP Sender
†
Address
Direct SMTP Port
Number
Direct SMTP Timeout
Direct SMTP Port
Number
Direct SMTP Timeout
E-mail Size Limit
Sender Address
Signature
Function Default
Allows to choose a method of sending from [
Direct SMTP
Only
].
Displays the sender address used for E-mails sent by
Direct SMTP from this machine.
Enter the port number used by Direct SMTP. Normally, 25
is used.
Sets the timeout time in seconds during which this device
retries to connect to the SMTP server.
Enter the port number used by Direct SMTP. Normally, 25
is used.
Sets the timeout time in seconds during which this device
retries to connect to the SMTP server.
Enter the maximum size of E-mail that can be sent in
Kilobytes. When the value is 0, the limitation for E-mail size
is disabled.
††
Displays the sender address used for E-mails sent from
this machine. Set in [
Settings.
Displays the signature to be inserted in the end of the E-
mail body. Set on the [
The default settings can be changed in [
Default Settings
8-8
Description
Via Server Only
], [ ], and [
E-mail Address
] in POP3 User
E-mail Settings
] page.
Common/Job
] page.
Via Server/
Direct SMTP