Expansion Memory; Dual Fax; Reception Port Selection - Kyocera TASKalfa 3051ci Operation Manual

Optional Equipment > Expansion Memory

Expansion Memory

By installing the 128 MB expansion memory, you can increase the image memory size and increase the number of
incoming (faxed) original pages that can be stored. Call a service representative for mounting or removal of the
expansion memory.

Dual FAX

Installing 2 optional FAX Kits (Dual FAX option) allows you to use 2 phone lines. This reduces the time until faxes are
sent to all the recipients in tasks such as sequential broadcast transmissions to multiple recipients. Also, because you
can then send and receive simultaneously, there will be fewer occasions when you cannot receive a fax during fax
transmission.
Dual FAX Settings
Refer to Selection of Telephone Line (Inch version only) on page 6-2
specifying the settings for the second line.

Reception Port Selection

You can make one of the 2 phone lines a receive-only line.
1
Press the [System Menu] key.
2
Press [FAX], [Next] of Reception and then press [Next] of FAX. Press [Change] of
Reception Port.
3
Select a receive-only port. If you do not want to set up a receive-only port, select [Off].
4
Press [OK].
and Local FAX Information Entry on page 6-5
7-3
when