Detailed Settings - Kyocera TASKalfa 3051ci Operation Manual

FAX Operation (Basic) > Automatic Send

Detailed Settings

Detailed settings allow you to use sub-address, select transmission start speed, ECM, and encryption. These settings
must be made in accordance with those of the destination. In addition, you can change the FAX density, image quality,
resolution and select the size of originals.
Press [Detail]. Press [Change] in each setting, change the setting, and press [OK].
When you have finished changing settings, press [OK].
Key
Sub Address
Transmission Start Speed
ECM
Encrypted Transmission
[On Hook]
Press this key to connect to the telephone line.
When the FAX number has been entered, the machine starts dialing to the receiving
system.
After pressing this key, you can dial the number of the receiving system using the
numeric keys. For details, refer to
Dialing methods without using the numeric keys
Using the Address Book (Refer to 3-19.)
Using One-touch keys (Refer to 3-22.)
Using the Speed Dial key (Refer to 3-22.)
Manual Redial (recall) (Refer to 3-23.)
FAX No. Entry - Detail
:
Sub Address
: 33600bps
Transmission Start Speed
: On
ECM
:
Off
Encrypted Transmission
Status
To communicate using the sub address, press this key. For details, refer to
Communication on page
To change the transmission start speed, press this key. Select the speed from 33,600 bps,
14,400 bps, and 9,600 bps.
ECM (error correction mode) prevents distortion of the fax image by automatically resending
any parts of the data that were not correctly sent due to the effects of noise on the telephone
line during transmission. To change the ECM communication setting, press this key.
To send faxes using encryption, press this key. For details, refer to
Manual Send on page
Destination
Change
Change
Change
Change
Cancel OK
02/02/2013 10:10
Description
4-38.
3-8
4-14.
Sub Address
Encryption on page 6-35.