Broadcast Transmission; Sending Using Fax Address - Kyocera TASKalfa 3051ci Operation Manual

FAX Operation (Advanced) > Broadcast Transmission

Broadcast Transmission

This function allows you to send the same originals to several destinations in one operation. The machine stores
(memorizes) originals to send in memory temporarily, and automatically repeats dialing and transmission to the set
destination afterwards.
NOTE
When using a group for the destination, you can send originals to up to 500 destinations in one operation.
You can use this function together with sub address communication and delayed transmission.
When direct transmission has been selected, it changes to memory transmission at the time of transmission.

Sending using FAX Address

1
Press [Fax] in the home screen.
2
Place the originals.
3
Select the destination.
Enter the fax number
1 Press [FAX No. Entry], and use the numeric keys to enter the fax number. Press
[Next Dest.] to enter the next fax number.
If Entry Check for New Destination is Off, press [OK] to complete entering the
number.
If Entry Check for New Destination is On, press [OK] and you are prompted to
confirm the FAX number is correct. Re-enter the same FAX number and press [OK]
to complete the entry.
When [New Destination Entry] is set to [Prohibit], the numeric keys cannot be used
to enter a fax number. For details, refer to
For details, refer to the machine's Operation Guide. (8 Setup and Registration (System menu) >
Send > Entry Check for New Dest.)
To continue entering a new number, press [FAX No. Entry] and repeat the above procedure.
To correct the FAX number, press [Edit].
2 After entering all the destinations, press [OK].
Select the destination from the Address Book
1 Press [Address Book].
2 Select the check boxes beside the destinations to select from the list.
To use an LDAP address book, select [Ext Address Book] in [Destination].
3 Press [OK].
Send and Forward on page
4-7
4-55.