Kyocera TASKalfa 3051ci Operation Manual page 63

FAX Operation (Basic) > Previewing Images
NOTE
If the transmission functions below are modified, the results are applied in the
preview image. For more information on the transmission functions, refer to
Automatic Send on page 3-4
• Scan Resolution
• Scan Density
• Original Size Selection
• Sending Size Selection
If you have placed a multiple-page original in the document processor, the machine
scans all the originals but only the first page is previewed. [Detail] can be pressed to
view all preview images. Press [
order they were scanned.
You cannot change the transmission functions while the preview image is
displayed.
• To change any of the transmission functions, press the [Stop] key or press
[Cancel]. The preview image disappears and the destination is cancelled. To see
the preview again, make the transmission function changes and select the
destination.
1
Press the [Start] key to send the fax.
Transmission begins.
NOTE
When On is selected in Destination Check before Send, a destination confirmation
screen is displayed when you press the [Start] key. For details, refer to the
Operation Guide for the machine. (8 Setup and Registration (System menu) > Send
> Dest. Check before Send)
To see a preview image when you are using the document processor, place the
originals in the document processor again.
A document stored in a polling box for polling transmission can be previewed in the
same way. For more information on polling transmissions, refer to
Transmission on page
You cannot preview images in the following situations:
• When you are using Mixed Sized Originals mode
• During a direct transmission
• During polling reception
• When On is selected in the Long Original setting
or FAX Operation (Advanced) on page
• Zoom
• Original Orientation
• Selection of Image Quality
• Border Erase
] to move through the preview images in the
4-44.
3-25
4-1.
Using Polling