Dialing The Same Receiving System (Redial); Automatic Redial; Manual Redial (Recall) - Kyocera TASKalfa 3051ci Operation Manual

FAX Operation (Basic) > Dialing the Same Receiving System (Redial)

Dialing the Same Receiving System (Redial)

Redial is a function allowing you to dial the last entered number once again.
When [Recall] is set to [Prohibited] in the system menu, you cannot use Redial. For details, refer to the Operation Guide
for the machine. (8 Setup and Registration (System menu) > Send > Recall)

Automatic Redial

This function automatically redials a receiving system that does not respond when you try to send fax.
No particular setting is required for automatic redial. Because the machine redials repeatedly at a regular interval, you
do not need to worry even when the communication by the receiving system is prolonged.
NOTE
When using direct transmission, the machine does not automatically redial.
You can change the number of automatic redials from between 0 and 14. For details, refer to
You cannot send delayed transmission immediately while the machine is waiting for redial.

Manual Redial (Recall)

Use this when the receiving system does not respond when you have tried to send a fax. When you want to send the fax
to the same receiving system, press [Recall], and you can call the receiving system you dialed on the destination list.
1
Press [Recall].
The receiving system you dialed is displayed on the destination list.
Enter Destination.
ABCD abcd@efg.com
Pause Space
On Hook Direct Chain
0001 0002 0003
AAA BBB CCC
0006 0007 0008
FFF GGG HHH
Destination Quick Setup Org./Sending
Data Format
Status
NOTE
When the last transmission included multi-address transmissions and computers
and e-mail destinations, they are also displayed. If necessary, add or delete the
receiving system.
2
Press the [Start] key.
The transmission will start.
NOTE
When On is selected in Dest. Check before Send, a destination confirmation screen
is displayed when you press the [Start] key. For details, refer to
Screen of Destinations on page
Recall information is canceled in the following conditions.
• When you turn the power off
• When you send a next fax (new recall information is registered)
• When you log out
Destination
Address
001/001
Book
FAX No.
Entry
Backspace
Detail Delete Recall
Check
Destinations
0004 0005
No.
DDD EEE
0009 0010
1/100
III JJJ
Image Quality Advanced Program
Setup
02/02/2013 10:10
5-12.
3-23
Retry Times on page 6-16.
Confirmation