Kyocera TASKalfa 3051ci Operation Manual page 32

Preparation Before Use > Using the Address Book
8
Press [i-FAX].
Address:
Name E-mail
Mode Simple
i-FAX Address
:
:
Resolution 200x200dpi
:
Compression MH
Paper Size : A4/Letter
Status
9
Press [Change] of i-FAX Address.
10Enter the destination i-FAX address (E-mail address) and press [OK].
Up to 128 characters can be entered.
If the other machine supports Direct SMTP, enter the IP address of the other machine.
NOTE
For details on character entry, refer to
11Press [ ] of Mode and select [Simple] or [Full].
Transmission
mode
Simple mode
Full mode
12Press [ ] of Via Server and select [On] or [Off].
When this setting is set to [Off], transmission takes place by direct SMTP (not through an e-mail
server).
When this setting is set to [On], transmission takes place by the currently used i-FAX method
(through an e-mail server).
13Press [Change] of Paper Size.
SMB FTP FAX i-FAX
Via Server On
Change
Change
Save
Back
Cancel
02/02/2013 10:10
Character Entry Method on page
Transmission confirmation is not sent to the destination machine.
Transmission confirmation is sent to the destination machine.
2-10
Description
11-2.