Selecting The Density - Kyocera TASKalfa 3051ci Operation Manual

FAX Operation (Basic) > Automatic Send

Selecting the Density

Adjust the density when scanning originals.
Select of Original Image
Select the original image.
1
Press [Color/Image Quality], and then [Density].
You can see a preview of the image to be sent by pressing [Preview]. For details, refer to
Previewing Images on page
2
Select the density.
The density can be selected in 13 levels from -3 (lighter) to +3 (darker). In Quick Setup, the
density is in seven levels. To adjust the density in 13 levels, press [More].
Density
Lighter
-3
Original : A4
Zoom : 100%
-2.5
:
Send A4
Preview
Add Shortcut
Status
3
Press [OK].
1
Press [Image Quality], and then [Original Image].
You can see a preview of the image to be sent by pressing [Preview]. For details, refer to
Previewing Images on page
Original Image
Text+Photo
Photo
Text
:
Original A4
Zoom : 100%
Send : A4
Preview
Add Shortcut
Status
2
Select the original image.
Text + Photo: Suitable for originals containing a mixture of text and photos.
Photo: For enhanced copies of photographs.
Text: Sharply renders pencil text and fine lines.
When text is selected, the OCR screen appears. If you need an image quality
suitable for OCR software (applications that convert images into text data), press
[On]. Otherwise, press [Off].
3
Press [OK].
3-24.
Destination
Normal Darker
-1 0 +1 +2 +3
-2
-1.5 -0.5 +0.5 +1.5 +2.5
Cancel OK
02/02/2013 10:10
3-24.
Destination
Select original image type
for best results.
Cancel OK
02/02/2013 10:10
3-9