Automatic Send; Switching To The Fax Screen; Selection Of Transmission Method - Kyocera TASKalfa 3051ci Operation Manual

FAX Operation (Basic) > Automatic Send

Automatic Send

General transmission using the numeric keys is explained.
NOTE
To send an Internet FAX (i-FAX), refer to

Switching to the FAX Screen

Check that the basic FAX screen is displayed.
If the basic FAX screen is not displayed, press [Fax] in the home screen. The screen for FAX appears.

Selection of Transmission Method

There are two transmission methods - memory transmission and direct transmission. The default is memory
transmission.
Memory Transmission
After originals are scanned into memory, the communication starts. Scans all originals into memory, then dials and
sends.
Memory Transmission (When originals are placed in the document processor):
After originals placed in the document processor are scanned and stored in the memory, the receiving system is dialed.
This method is very convenient because you can have originals returned to you without waiting for sending of the
originals to be completed. It is suitable for sending multiple-page sheet originals.
Memory Transmission (When originals are placed on the glass surface):
This method is suitable for sending book originals that cannot be placed in the document processor. After originals
placed on the glass surface are scanned and stored in the memory, the receiving system is dialed.
i-FAX Transmission on page
Select the function.
Copy
Job Box
Status/ Device
Job Cancel Information
Status
Enter Destination.
ABCD
Pause Space
On Hook Direct
0001
AAA BBB
0006
FFF GGG
Destination Quick Setup
Status
3-4
8-9.
Admin
Send FAX
Removable
FAX Box
Memory
Accessibility Language System Help
Screen Menu
001/001
abcd@efg.com
Backspace
Chain Detail Delete
0002 0003 0004 0005
CCC DDD EEE
0007 0008 0009 0010
HHH III JJJ
Org./Sending Image Quality
Data Format
Logout
Custom Box
Internet Browser
Program Message
Board
02/02/2013 10:10
Destination
Address
Book
FAX No.
Entry
Recall
Check
Destinations
No.
1/100
Advanced Program
Setup
02/02/2013 10:10