Settings For Forwarding From Command Center Rx (Forward Settings) - Kyocera TASKalfa 266ci Operation Manual

Using Convenient Fax Functions > Memory Forwarding
Settings for Forwarding from Command Center RX (Forward
Settings)
You can use Command Center RX on a computer connected to the network to specify the forwarding settings on this
machine.
Refer to the machine's Operation Guide for information on the network settings.
NOTE
To fully access the features of the Command Center RX pages, enter the User Name and Password and click [Login].
Entering the predefined administrator password allows the user to access all pages, including Document Box,
Address Book, and Settings on the navigation menu. The factory default setting for the default user with administrator
privileges is shown below.
Login User Name
Login Password
* Upper case and lower case letters are distinguished (case sensitive).
Accessing Command Center RX
1
2
Admin
Admin
Display Command Center RX
1
Open the web browser.
2
In the Address or Location bar, enter the machine's IP address as the URL, e.g.
192.168.48.21/.
The web page displays basic information about the machine and Command Center RX as
well as the current status of the machine.
NOTE
If the screen There is a problem with this website's security certificate. is displayed,
configure the certificate. For details on Certificates, refer to the Command Center RX User
Guide.
You can also continue the operation without configuring the certificate.
Select settings in Command Center RX.
Select a category from the navigation bar on the left to view and set values for that particular
category.
If administrator privileges have been enabled on Command Center RX, remember to enter the
correct user name and password when trying to access the relevant screens.
For details, refer to the Command Center RX User Guide.
6-12