Changing And Deleting Registration Contents Of Encryption Key; Operation At The Sending System - Kyocera TASKalfa 3051ci Operation Manual

Setup and Registration > Encryption
Changing and Deleting Registration Contents of Encryption
Key

Operation at the Sending System

When sending originals by encrypted transmission, use the Address Book registered for encryption or set encrypted
transmission when dialing directly using the numeric keys.
NOTE
Encrypted transmission can be also used in broadcast transmission.
With encryption communication, you cannot conduct sub address communication.
1
Follow steps 1 to 2 of
FAX - Encrypt. Key Registration
Add a key to use for encrypted FAX transmissions.
(Up to 20 keys can be added.)
Encryption Key
Key01
Key02
Key03
Key04
Key05
Status
2
Select the encryption key to be changed or deleted. To change the registration
contents, go to step 3, and to delete the registration contents, go to step 7.
3
Press [Add/Edit].
4
Press [Encryption Key].
5
Press [Backspace] to delete the encryption key last entered. Use the numbers (0 to 9)
and the alphabet (A to F) on the touch panel, enter the encryption key (16 digits), and
press [OK].
6
Press [OK]. When the change confirmation screen appears, press [Yes]. Go to step 8.
7
Press [Delete]. When the deletion confirmation screen appears, press [Yes].
8
To change or delete other encryption keys, follow steps 2 to 7.
1
Register the encryption key you have arranged with the receiving system.
(Refer to Registering an Encryption Key on page
When an encryption key has already been registered, go to the next step.
2
Press [Fax] in the home screen.
3
Place the originals.
4
Press [FAX No. Entry].
5
Use the numeric keys to enter fax number of the other party.
For details, refer to Direct Transmission on page
NOTE
When encrypted transmission has been set to a destination in the Address Book or
One-touch keys, you can use the destination.
Registering an Encryption Key on page
Add/Edit
Delete
Close
02/02/2013 10:10
3-5.
6-37
6-36.
6-36.)