Selection Of Transmit Terminal Identification (Tti) - Kyocera TASKalfa 3051ci Operation Manual

Setup and Registration > Selection of Transmit Terminal Identification (TTI)

Selection of Transmit Terminal Identification (TTI)

The transmit terminal identification (TTI) is the information about the sending machine (transmit terminal) that is printed
by the receiving machine on the received fax. The information includes the date and time of transmission, number of
pages sent, name, fax number, and Internet FAX address. This machine enables the user to select if the TTI is printed
out on the fax on the receiving system. Regarding the location of the information to be printed, you can select inside or
outside of the page image being sent.
NOTE
You can specify the same TTI for FAX and Internet FAX (i-FAX) transmissions.
Normally, the Local FAX Name is printed in the transmit terminal identification (TTI). However, when job accounting is
enabled and an Account ID is entered when a fax is sent, you can enable a setting to have the Account Name or Local
FAX Name, whichever was selected, be printed. To enable this function, refer to
4.)
1
Press the [System Menu] key.
2
Press [FAX], [Next] of Transmission, [Next] of Basic and then press [Change] of TTI.
FAX - TTI
Attach TTI (Transmit Terminal Identification)
in transmitted documents.
Off
Status
3
Press the location for printing the information on the fax. If you don't want to print,
press [Off].
4
Press [OK].
Outside Inside
Cancel OK
02/02/2013 10:10
6-3
Setting the TTI information on page 6-