Kyocera TASKalfa 3051ci Operation Manual page 88

FAX Operation (Advanced) > Printing/Sending Received Faxes by Requirements (Memory Forwarding)
When FAX was selected in step 11.
Requirements
Sub Address
Sender FAX Number
Port
When i-FAX was selected in step 11.
Search Requirements
i-FAX Address
NOTE
When setting a forwarding condition by selecting a sender's FAX number (a local
FAX information entry of the destination machine) but leaving blank to the sender's
FAX number, you can forward a FAX that is received from a sender whose number
is not registered in the sender's FAX number entries.
When you set the sender fax number as a forwarding requirement, select the
search requirement from Search by pull-down menu.
• Same as
• Starts with
• Ends with
• Includes
13Press [OK].
14Press [Next] of Forward Setting.
15Press [Change] of Forwarding.
16Select [On] or [Off] whether to forward or not to forward the received documents and
press [OK].
17Press [Change] of Forward Destination.
Registration method
Press [Sub Address] and enter the sub address using the
numeric keys. You can use up to 20 digits including the
numbers from 0 to 9, ' (space)', '#' and '*' characters to
enter a sub address.
Press [Sender FAX Number] and enter the sender's fax
number using the numeric keys. You can enter up to 20
characters.
A maximum of only 9 conditions for which sender fax
number is selected as the forwarding condition can be
registered.
When [New Destination Entry] is set to [Prohibit], the
numeric keys cannot be used to enter a fax number. For
details, refer to Send and Forward on page
Press [Port] and select [Port 1] or [Port 2]. If the port is
selected, fax box forwarding will not be possible.
This setting only appears when 2 optional FAX Kits (Dual
FAX option) are installed.
Registration method
Press [i-FAX Address]. Enter the destination Internet FAX
address. You can enter up to 128 characters.
4-22
4-55.