Setting The Cassette For The Print Output Of Received Faxes - Kyocera TASKalfa 3051ci Operation Manual

Setup and Registration > Media Type for Print Output

Setting the cassette for the print output of received faxes

By specifying the media type, faxes can be received on the corresponding cassette. Faxes will be automatically reduced
to the set paper size. For detail, refer to Reduced Reception on page 6-40
1
Press the [System Menu] key.
2
Press [Cassette/MP Tray Settings].
3
Cassette Setting, select one of [Cassette 1] to [Cassette 7] and press [Next].
Press [Change] of Paper Size.
NOTE
[Cassette 3] to [Cassette 7] are shown when the optional paper feeder is installed.
4
Inch models: Press [Auto] and then [Inch].
Metric models: Press [Auto] and then [Metric].
Cassette/MP Tray Settings - Paper Size
Set cassette paper size.
Auto Metric
Standard
Sizes 1
Standard
Sizes 2
Status
NOTE
Set the paper size of the cassette used for fax reception as follows:
Inch models: Press [Auto] and then [Inch].
Metric models: Press [Auto] and then [Metric].
If the above setting is changed, it will not be possible to print faxes.
For details, refer the machine's Operation Guide.
(3 Preparation before Use > Specifying Paper Size and Media)
5
Press [OK].
The previous screen reappears.
6
Press [Change] of Media Type and select the media type. Then press [OK].
The previous screen reappears.
Common Settings - Media Type
Select type of paper in Cassette 1.
Plain Rough
Recycled Preprinted Bond
Prepunched Letterhead
Custom 1 Custom 2 Custom 3
Custom 6 Custom 7 Custom 8
Status
7
Press [Close]. The display returns to the default System Menu screen.
Inch
Cancel OK
02/02/2013 10:10
Vellum
Color
Thick High Quality
Custom 4 Custom 5
Cancel OK
02/02/2013 10:10
6-20