Setup and Registration > Encryption
Operation at the Receiving System
To conduct encryption communication operating the receiving system, follow the steps below.
NOTE
In encryption communication, sub address communication cannot be used.
1
Register the encryption key you have arranged with the sending system.
(Refer to
Registering an Encryption Key on page
2
Press the
[System
Menu] key.
3
Press [FAX], [Next] of Reception and [Change] of Encrypted Reception.
FAX - Encrypted Reception
Off
Encryption Key No.
On
Key 01
Key 02
Key 03
Key 04
Key 05
Status
4
Press [On], select the encryption key number and press [OK].
5
The sending system conducts encrypted transmission. When encryption
communication is conducted normally, the machine decrypts the encrypted originals
received and prints the originals.
1/2
Cancel
OK
02/02/2013 10:10
6-39
6-36.)