Manual Send; Using After Confirming The Connection To The Receiving System; Using A Telephone To Send - Kyocera TASKalfa 3051ci Operation Manual

FAX Operation (Advanced) > Manual Send

Manual Send

This method allows you to send originals by pressing the [Start] key after confirming that the telephone line has
connected to the receiving system. Connecting a telephone set (commercially available product) to this machine
enables you to talk with the person at the receiving system before sending originals.
Using after Confirming the Connection to the Receiving
System
You can send originals after confirming that the telephone line has connected to the receiving system.

Using a Telephone to Send

When you want to talk to the person at the receiving system or the receiving system needs to switch to fax, use this
method to send originals.
1
Press [Fax] in the home screen.
2
Set the originals.
3
Press [On Hook].
4
Use the numeric keys to enter the number of the receiving system.
NOTE
To cancel the operation, press [Line Off].
5
When you hear the fax tone, the telephone line has connected to the receiving
system. Press the [Start] key.
Transmission begins.
NOTE
When On is selected in Destination Check before Send, a destination confirmation
screen is displayed when you press the [Start] key. For details, refer to
Confirmation Screen of Destinations on page
1
Set the originals.
2
Lift the handset, and dial the number of the receiving system.
3
Check if the telephone line has connected to the fax of the receiving system.
When you hear the fax tone
The receiving system is on fax.
1 Press [Fax] in the home screen.
2 Press [On Hook].
3 Press the [Start] key. Transmission begins.
When you hear a voice from the receiving system
The telephone line has connected to the telephone of the receiving system. When the
conversation is over, follow steps 1 to 3 above.
4
When sending starts (when the [Processing] indicator on the operation panel starts
blinking), return the handset to its original position.
5-12.
4-14