FAX Operation (Advanced) > Long Originals
Long Originals
Use the document processor to scan long originals (originals that are longer in the paper feeding direction).
NOTE
Only a single side of a long original cannot be scanned.
Originals of up to 1,600 mm/63" long can be scanned.
1
Press [Fax] in the home screen.
2
Place the originals in the document processor.
3
Press [Original/Sending Data Format], and then [Long Original].
4
To scan long originals, press [On], and to scan standard size originals, press [Off].
5
Press [OK].
6
Set the destination, and press the [Start] key.
Transmission begins.
NOTE
When On is selected in Destination Check before Send, a destination confirmation
screen is displayed when you press the [Start] key. For details, refer to
Confirmation Screen of Destinations on page
5-12.
4-2