Sending Using I-Fax Address - Kyocera TASKalfa 3051ci Operation Manual

FAX Operation (Advanced) > Broadcast Transmission

Sending using I-FAX Address

NOTE
For more information on sending an Internet FAX (i-FAX), refer to
Select the destination from the One-touch keys
Press all the One-touch keys to which necessary destinations are registered.
NOTE
For details of the Address Book, refer to
Book on page 3-19. For details of the One-touch keys, refer to
Keys on page 2-15.
You can select destinations using a combination of direct entry, the Address Book
and One-touch keys.
4
After selecting all the destinations, press the [Start] key. Transmission begins.
NOTE
When On is selected in Dest. Check before Send, a destination confirmation screen
is displayed when you press the [Start] key. For details, refer to
Screen of Destinations on page
1
Press the [Send] key.
2
Place the originals.
3
Select the destination.
Enter the i-FAX address
1 Press [i-FAX Address Entry].
2 Press [i-FAX Address], enter the i-FAX address and then press [OK].
3 Press [OK].
If Entry Check for New Destination is Off, the entry is completed.
If Entry Check for New Destination is On, you are prompted to confirm the i-FAX
number is correct. Re-enter the same i-FAX number and press [OK] to complete
the entry.
For details, refer to the machine's Operation Guide. (8 Setup and Registration (System menu) >
Send > Entry Check for New Dest.)
To continue entering a new address, press [i-FAX Address Entry] and repeat the above
procedure.
To correct the i-FAX number, press [Detail/Edit].
Selecting a Destination from the Address
5-12.
i-FAX Transmission on page
4-8
Using One-touch
Confirmation
8-9.