Memory fans
This section describes how to remove and install the memory fans.
Removing the memory fans
1.
Disconnect power from the workstation (see
2.
Remove the side access panel (see
3.
Remove the airflow guide (see
4.
Grasp the sides of the memory fan assembly (1), and then use your index fingers to press the
memory fan assembly release tabs (2), as shown in the following figure.
Figure 5-85
ENWW
Removing the side access panel on page
Removing the airflow guide on page
Releasing the memory fan assembly
Predisassembly procedures on page
Removing and installing components
77).
79).
80).
155