Printer Maintenance; System Settings - Dell C3760dn Color Laser Printer User Manual

Printer Maintenance

The Printer Maintenance tab includes the System Settings, Maintenance, Tray Settings, Panel Language, TCP/IP
Settings, Network Settings, and USB Direct Print Defaults pages.

System Settings

Purpose:
To configure the power management of the printer, auto clear time, alarm tones, time-out time, date and time,
mm/inch setting, job log auto print, Print ID, setting of the additional memory, and setting of the substitute tray.
Values:
Power Saver Timer
Auto Reset
Fault Time-out
Job Time-out
Date & Time
Audio Tone
176
Understanding the Tool Box Menus
*1
Sleep Available Range:
1–60 minutes
*1
Deep Sleep Available Range:
1–60 minutes
*2
Auto-Off Timer 0
Available Range:
60–1440 minutes
45 seconds
1 minute
2 minutes
3 minutes
4 minutes
0
Available Range: 3–300 seconds
0
Available Range: 5–300 seconds
Time Zone
Set Date
Set Time
Date Format
Time Format
Control Panel Off
Tone
On
Invalid Key Tone Off
On
Machine Ready Off
Tone
On
Job Completed Off
Tone
On
Fault Tone Off
On
Sets the amount of transition time to the Sleep mode
after the printer finishes a job.
Sets the amount of transition time between the Sleep
mode and the Deep Sleep mode.
Sets the time it takes to automatically turn off the printer
after the printer has entered the Deep Sleep mode.
Sets the amount of time before the printer automatically
resets the settings on the operator panel to the defaults
when no additional settings are made.
Sets the amount of time the printer waits before canceling
a job when the job stops abnormally.
Sets the amount of time the printer waits for additional
data from the computer before it cancels the job.
Sets the time zone.
Sets the date.
Sets the time. You can select AM or PM when Time
Format is set to 12 Hour.
Sets the date format.
Sets the time format in 24 Hour or 12 Hour.
Does not emit a tone when the operator panel input is
correct.
Emits a tone when the operator panel input is correct.
Does not emit a tone when the operator panel input is
incorrect.
Emits a tone when the operator panel input is incorrect.
Does not emit a tone when the printer becomes ready.
Emits a tone when the printer becomes ready.
Does not emit a tone when a print job is complete.
Emits a tone when a print job is complete.
Does not emit a tone when a job ends abnormally.
Emits a tone when a job ends abnormally.