Printer Maintenance; System Settings - Dell 2130cn - Color Laser Printer User Manual

Printer Maintenance
The Printer Maintenance tab includes the System Settings, Paper Density, Registration Adjustment, Adjust Altitude, Reset Defaults, Non-Dell Toner,
Initialize PrintMeter, Tray Settings, TCP/IP Settings, and Network Settings pages.
NOTE: Values marked by an asterisk (*) are the factory default menu settings.

System Settings

Purpose:
To Use these settings to configure the printer's power management, warning tones, time-out time, operator panel language setting, job log auto print,
position of the Print ID, setting of the dump print, setting of the additional memory, setting of the substitute sheet, mm/inch setting, and duplex print settings.
Values:
1-30 Min.
Power Saver Timer
1
Mode 1*
3 Min.*
5-60 Min.
Power Saver Timer
1
Mode 2*
10 Min*
Control Panel Tone
Invalid Key Tone
Machine Ready Tone
Job Complete Tone
Fault Tone
Audio Tones
Alert Tone
Out of Paper Alert
Tone
Low Toner Alert
Tone
Base Tone
0
Fault Time-Out 3-300 sec
60 sec*
0
Time-Out 5-300 sec
30 sec*
English*
French
Italian
German
Panel Language Spanish
Dutch
Danish
Norwegian
Swedish
Off*
Auto Log Print
On
Off*
Top Left
Print ID Top Right
Bottom Left
Specifies the time before the printer enters the power saver timer mode 1(sleep mode) after it
finishes a job.
Specifies the time before the printer enters the power saver timer mode 2 (deep sleep mode) after
it goes into the power saver timer mode 1.
Off* Does not emit a tone when the operator panel input is correct.
On Emits a tone when the operator panel input is correct.
Off* Does not emit a tone when the operator panel input is incorrect.
On Emits a tone when the operator panel input is incorrect.
Off* Does not emit a tone when the printer becomes ready.
On Emits a tone when the printer becomes ready.
Off* Does not emit a tone when a job is complete.
On Emits a tone when a job is complete.
Off* Does not emit a tone when a job ends abnormally.
On Emits a tone when a job ends abnormally.
Off* Does not emit a tone when a problem occurs.
On Emits a tone when a problem occurs.
Off* Does not emit a tone when the printer runs out of paper.
On Emits a tone when the printer runs out of paper.
Off* Does not emit a tone when toner or some other consumable is low.
On Emits a tone when toner or some other consumable is low.
Does not emit a tone when the operator panel display is returned to the default settings by
Off*
scrolling the loop menu.
Emits a tone when the operator panel display is returned to the default settings by scrolling the
On
loop menu.
Disables the fault time-out.
Specifies the amount of time the printer cancels for a job stops abnormally.
Disables the job time-out.
Specifies the amount of time before the printer cancels for jobs that stop abnormally.
Specifies the language to be used on the operator panel.
Does not automatically output a log of completed jobs from the printer.
Outputs a log of completed jobs from the printer automatically.
Does not print the user ID.
Prints the user ID on the specified location.