You can specify each value for process, left, and right colors (LY, LM, LC, RY, RM, RC, PY, PM, and PC) by repeating the
steps 6 to 8.
The registration values are always shown as 0 the next time you enter the menu.
10 Press the
button until Color Regi Chart is highlighted, and then press the
11 Press the
button until Yes is highlighted, and then press the
The color registration chart with the new values is printed.
If the straightest line is not at the value of 0, adjust the values again. Checking the charts before and after the
adjustments will help you to determine the values to enter.
When Using the Tool Box
Using the Tool Box, enter the values that you found in the color registration chart to make adjustments.
1 Click Start
For details about starting the Tool Box, see "Starting the Tool Box."
The Tool Box opens.
2 Click the Printer Maintenance tab.
3 Select Maintenance from the list at the left side of the page.
The Maintenance page is displayed.
4 Specify each value for process, left, and right colors in Registration Adjustments under Manual Registration
Adjustments, and then click Apply New Settings.
5 Click Start next to Print Color Regi Chart under Color Registration Adjustments.
The color registration chart is printed with the new values.
6 Adjust till all straight lines are at the value of 0. Show image of before and after adjustment will help.
After printing the color registration chart, do not turn off the printer until the printer motor has stopped running.
is not next to the straightest lines, determine the values and adjust the printer again.
Dell C3760 Color Laser Printer
Maintaining Your Printer