For Windows 8 and Windows Server 2012
Point to the top or bottom right corner of the screen, and then click Search → Type
then click Run → Type
Direct Connection Setup
For installing PCL and PS printer driver
1 In the Easy Setup Navigator window, click Installing Driver and Software to launch the installation software.
2 Select Personal Installation, and then click Next.
3 Follow the on-screen instructions to connect the computer and the printer with a USB cable, and then turn the
The Plug and Play installation starts and the installation software proceeds to the next page automatically.
If the installation software does not automatically proceed to the next page, click Install.
4 Select either Typical Installation (recommended) or Custom Installation from the installation wizard, and then
click Install. If you select Custom Installation, you can select the specific software you want to install.
5 Click Finish to exit the wizard when the Congratulations! screen appears.
A personal printer is a printer connected to your computer or a print server using a USB. If your printer is connected
to a network and not your computer, see "Network Connection Setup."
For installing XML Paper Specification (XPS) printer driver
XPS driver is supported on the following operating systems: Windows Vista, Windows Vista 64-bit Edition, Windows
Server 2008, Windows Server 2008 64-bit Edition, Windows Server 2008 R2, Windows 7, Windows 7 64-bit Edition, Windows 8,
Windows 8 64-bit Edition, and Windows Server 2012.
If you are using Windows Vista or Windows Server 2008, you need to install Service Pack 2 or later, and then the
Windows Platform Update (KB971644). The update (KB971644) is available for download from Windows Update.
Windows Vista or Windows Vista 64-bit Edition
1 Extract the following zip file to your desired location.
D:\Drivers\XPS\Win_7Vista\XPS_3760.zip (where D is the drive letter of the optical drive)
2 Click Start→ Control Panel→ Hardware and Sound→ Printers.
3 Click Add a printer.
4 Click Add a local printer.
5 Select the port connected to this product, and then click Next.
6 Click Have Disk to display the Install From Disk dialog box.
7 Click Browse, and then select the extracted folder in step 1.
8 Click OK.
9 Select your printer name and click Next.
10 To change the printer name, enter the printer name in the Printer name box, and then click Next. To use this
printer as the default printer, select the check box displayed under the Printer name, and then click Next.
If the User Account Control dialog box appears, click Continue.
Installing Printer Drivers on Windows
(where D is the drive letter of the optical drive), and then click
in the search box, click Apps, and