Enabling and Disabling Printing from Network Addresses
You can enable printing from the "192.168" network address and disable printing from the "192.168.200"
The example below describes how to enable printing from the "192.168.200.10" IP address.
1 Click the first column of the Access List row 1.
2 Enter "192.168.200.10" in the Address field and "255.255.255.255" in the Address Mask field.
3 Select Accept.
4 Click the first column of the Access List row 2.
5 Enter "192.168.200.0" in the Address field and "255.255.255.0" in the Address Mask field.
6 Select Reject.
7 Click the first column of the Access List row 3.
8 Enter "192.168.0.0" in the Address field and "255.255.0.0" in the Address Mask field.
9 Select Accept.
10 Click Apply New Settings.
To specify the setting of the Server Message Block (SMB) protocol.
Auto Master Mode
To configure detailed settings of E-Mail Alert. This page can also be displayed by clicking the E-Mail Alert in the
E-Mail Server Settings
Primary SMTP Gateway
SMTP Port Number
Dell™ Printer Configuration Web Tool
Sets the host name of the server computer.
Sets the workgroup.
Sets the maximum number of sessions.
Sets whether to notify the host name and workgroup name in Unicode characters during
Sets whether to enable the Auto Master Mode.
Sets whether to encrypt the password.
Sets the job time-out period between 60 and 3,600 seconds.
Sets the connection time-out period between 60 and 3,600 seconds.
Sets the primary SMTP gateway.
Sets the SMTP port number. This must be 25, 587 or between 5,000 and
Sets the authentication method for outgoing e-mail.