Flip on Long Edge
Flip on Short Edge
Using the Stored Print Feature
When you send a job to the printer, you can specify in the printer driver to store the job in the memory or hard disk.
When you are ready to print the job, go to the printer and use the operator panel to identify which job in the
memory or hard disk you want to print.
The data in the memory is cleared when the printer is turned off. The data on the optional hard disk is not cleared even
when the printer is turned off.
Stored Print feature is available when:
The optional 512MB memory module is installed.
The RAM disk is enabled in the printer menu.
RAM Disk is set to Available in the printer driver.
The optional hard disk is installed.
Assumes binding along the long edge of the page (left edge for portrait orientation and top edge
for landscape orientation). The following illustration shows long-edge binding for portrait and
Assumes binding along the short edge of the page (top edge for portrait orientation and left
edge for landscape orientation). The following illustration shows short-edge binding for portrait
and landscape pages: