Resetting Defaults
After executing this function and rebooting the printer, all the menu parameters are reset to their default values.
The following menu parameters are exceptions and are not reset.
•
Network settings
•
Panel Lock settings and password
•
Function Enabled settings and passwords
•
Login Error settings
•
Set Available Time settings
•
Secure Job Expiration settings
•
USB Port settings
•
Data Encryption settings
•
Hard Disk Over write settings
•
ColorTrack Mode settings
•
ColorTrack Error Report settings
•
Non Registered User settings
When Using the Operator Panel
1 Press the
(Menu) button.
2 Press the
button until Admin Settings is highlighted, and then press the
3 Press the
button until Maintenance is highlighted, and then press the
4 Press the
button until Reset Defaults is highlighted, and then press the
5 Press the
button until Yes is highlighted, and then press the
The printer is restarted automatically.
(Set) button.
(Set) button.
(Set) button.
(Set) button.
Understanding the Printer Menus
227