Setting The Ssl-Use Server Certificate (Http/Ipp); Setting Ldap-Ssl/Tls Communication; Setting Server Certificate Verification For Ldap-Ssl/Tls Communication - Dell C3760dn Color Laser Printer User Manual

Setting the SSL-use Server Certificate (HTTP/IPP)

NOTE:
To manage digital certificates, you must first set encryption of the optional hard disk to On, and then set up HTTPS
communication. For details, see "Preparing to Manage Certificates."
1 Import the certificate to be used with the SSL-use server. For more information, see "Importing a Digital
Certificate."
2 Set the certificate to be used with the SSL-use server. For more information, see "Setting a Digital Certificate."
3 Confirm whether the certificate is set correctly. For more information, see "Confirming the Settings of a Digital
Certificate."
NOTE:
Confirm whether the newly set certificate, not the self-signed certificate, is associated.
4 After restarting the printer, the certificate set as described above is used as the server certificate when executing
communication with HTTP/IPP-SSL/TLS.

Setting LDAP-SSL/TLS Communication

NOTE:
This setting is available only when the optional hard disk is installed and is set to On for encryption.
1 Select Print Server Settings from the left side of the page.
2 Click the Security tab.
3 Select SSL/TLS.
4 Select the Enable check box for LDAP-SSL/TLS Communication.
5 Click Apply New Settings.
6 After restarting the printer, LDAP-SSL/TLS Communication is enabled.
NOTE:
When executing the certificate validity of the server and the presentation of the client certificate, see "Setting Server
Certificate Verification for LDAP-SSL/TLS Communication" and "Setting Client Certificate for LDAP-SSL/TLS Communication."

Setting Server Certificate Verification for LDAP-SSL/TLS Communication

NOTE:
This setting is available only when the optional hard disk is installed and is set to On for encryption.
NOTE:
This feature is enabled only when Enable is set for LDAP-SSL/TLS Communication.
1 Import the root certificate (including intermediate certificate) for the LDAP server certificate. For more
information, see "Importing a Digital Certificate."
NOTE:
In the verification of a certificate of the connected server, to automatically search for an imported certificate and
verify the path, the certificate does not need to be associated.
2 Confirm whether the root certificate is correctly imported to the LDAP server. For more information, see
"Confirming the Settings of a Digital Certificate."
3 Select Print Server Settings.
4 Click the Security tab.
5 Select SSL/TLS.
6 Select the Enable check box for Verify Remote Server Certificate.
7 Click Apply New Settings.
8 After restarting the printer, the certificate presented by the LDAP server is verified when LDAP-SSL/TLS
communication starts with the LDAP server.
NOTE:
When the result of verification is NG, communication is not established and an error results.
287
Using Digital Certificates