Dell C3760dn Color Laser Printer User Manual page 141

All Tones
Low Toner Alert Message
Auto Log Print
*2
RAM Disk
Panel Language
Auto Reset
Fault Time-out
Job Time-out
Default Paper Size
Print ID
Print Text
Banner Sheet Insert Position
Banner Sheet Specify Tray
Substitute Tray
*3
Letterhead 2 Sided
A4<>Letter Switch
*3
Report 2 Sided Print
Use Another Tray
*1
Auto-Off Timer feature is available only in certain regions.
*2
This item is available only when the optional 512MB memory module is installed and the optional hard disk is not installed.
*3
This item is available only for Dell C3760dn Color Laser Printer.
Network Settings
Purpose:
To Specify the PostScript communication protocol for this printer.
Values:
Adobe Protocol Sets PostScript communication protocol for each interface.
USB Settings
Purpose:
To change USB settings on your printer.
Values:
USB Port Enables the USB interface on your printer.
Adobe Protocol
Sets PostScript communication protocol for each interface.
Sets the volume of all the alert tones, or disables all the tones.
Alerts you if the toner is low.
Sets if a job history needs to be printed after every 20 jobs.
Sets whether to allocate RAM for the file system for the Secure Print, Proof
Print, Private Mail Box Print, and Public Mail Box Print features.
Used to set the language on the LCD panel.
Sets the amount of time before the printer automatically resets its settings
to the defaults when no additional settings are made.
Sets the amount of time the printer waits before canceling a job that stops
abnormally.
Sets the amount of time the printer waits for data to arrive from the
computer.
Sets the default print paper size.
Sets where to print the user ID on the output paper.
Sets whether the printer outputs PDL data (which is not supported by the
printer) as text when the printer receives it.
Sets where to insert a banner sheet in the output.
Sets from which tray a banner sheet is fed.
Sets whether to use another size paper when the paper that is loaded in the
specified tray does not match the paper size settings for the current job.
Sets whether to print on both sides of letterhead.
Sets whether to print A4 size jobs on Letter size paper if A4 is not available
in the paper trays and vice versa (Letter size job on A4 size paper).
Sets whether to print reports on both sides a sheet of paper.
Sets whether to show a message to select another tray when the specified
paper is not available in the paper tray.
Dell™ Printer Configuration Web Tool
139