Public Key Method
Size of Public Key
Use this certificate
This item is available only when the self-signed certificate has been generated.
This item is displayed only when the optional hard disk is installed and is set to On for encryption.
This item is effective only when connected via SSL/TLS (https). Only the administrator is allowed to display the pages.
This item is displayed only when the optional hard disk is installed and is set to On for encryption. If not, Certificate Details is displayed.
To specify the Security Architecture settings for Internet Protocol (IPsec) for encrypted communication to the
Re-enter Pre-Shared Key
IKE SA Lifetime
IPsec SA Lifetime
Remote peers IPv4 address Sets the IP address to connect to.
Remote peers IPv6 address Sets the IP address to connect to.
Non IPsec communication
This item is effective only when the optional hard disk is installed and is set to On for encryption.
If IPsec is enabled with incorrect settings, you must disable it using the IPsec menu on the operator panel.
Dell™ Printer Configuration Web Tool
Displays the issuer to certificate.
Displays the serial number of the device.
Displays the public key method.
Displays the size of public key.
Displays the time the certificate is valid.
Displays the time the certificate is invalid.
Displays whether certificate is valid or not.
Displays the purpose of certificate.
Displays the type of device certificate you selected.
Displayed only when an e-mail address is specified in the certificate.
Click to apply this certificate to the device.
Click to delete this certificate.
Click to export the certificate to the other device.
Select the check box to enable the protocol.
Sets IKE authentication. Device Certificate is displayed on the list only
when an effective digital signature is set up.
Sets a shared key. Up to 255 alphanumeric characters, periods, and
hyphens can be used.
Enters the shared key again to confirm it.
Displays the device certificate.
Sets the lifetime for IKE SA from 5 to 28,800 minutes.
Sets the lifetime for IPsec SA from 5 to 2,880 minutes.
Sets the DH group.
Select the check box to enable the PFS setting.
Allows communication with a device which does not support IPsec.