Sets the time to delete the files stored as Secure Print in the optional 512MB memory module or the
optional hard disk drive.
Sets the period to repeat the setting.
Sets the day of the week to repeat the setting.
Sets the day of the month to repeat the setting.
USB Direct Print Defaults
To create your own USB Direct Print Defaults setting.
Sets whether to print in color or in black and white.
Sets the default input tray.
2 Sided Printing
Sets whether to print on both sides of a sheet of paper.
Sets whether to print two or more pages on one side of a sheet of paper.
Sets whether to sort the output.
Sets a password.
Re-enter PDF Password Confirms the set password.
The Printer Maintenance tab includes the Paper Density, Adjust Transfer Belt Unit, Adjust 2nd BTR, Adjust
Fusing Unit, Auto Registration Adjustment, Color Registration Adjustments, Reset Defaults, Initialize
PrintMeter, Storage, Non-Dell Toner, Adjust Altitude, Clock Settings, and Web Link Customization pages.
To specify the paper density.
Sets the density of plain paper to Light or Normal.
Sets the density of labels to Light or Normal.
Adjust Transfer Belt Unit
To adjust the transfer bias when ghosting occur. (The ghost image may be the image of the previous page, or a part of
the page currently printing.)
If faint black colored ghosts appear, try to decrease the value.
If faint ghosts in color (yellow, magenta, or cyan) appear, try to decrease the value.
Adjust 2nd BTR
Dell™ Printer Configuration Web Tool