The Output Is Too Light - Dell C3760dn Color Laser Printer User Manual

• Streaks appear on the output
• Part or the entire output is black
• Pitched color dots
• Vertical blanks
• Ghosting
• Light-induced fatigue
• Fog
• Bead-Carry-Out (BCO)
• Jagged characters
• Banding
• Auger mark
• Wrinkled/Stained paper
• Damage on the leading edge of paper

The output is too light

Action
1 The toner cartridges may be low or need to be replaced. Confirm the
amount of toner left in each toner cartridge.
Check the toner level in the Status tab in the Status Monitor.
a
Replace the toner cartridges as necessary.
b
Does this solve your problem?
2
If you are using non-Dell brand toner cartridges, enable the Non-Dell
Toner option.
Launch the Tool Box, and click Maintenance on the Printer
a
Maintenance tab.
Ensure that the On check box under Non-Dell Toner is selected.
b
Does this solve your problem?
3 Disable the Toner Saver in the printer driver.
On the Others tab, ensure that Off is selected in the Toner Saver
a
drop-down menu.
Does this solve your problem?
Yes No
The task is complete. Go to action 2.
The task is complete. Go to action 3.
The task is complete. Go to action 4.
Troubleshooting Guide
373