802.1x
Purpose:
To specify the settings for IEEE 802.1x authentication for encrypted communication to the printer.
Values:
Configure 802.1x
Enable IEEE 802.1x
Authentication Method EAP-MD5
Login Name: (Device
Name)
Password
Re-enter Password
Certificate Validation
*1
This item is displayed only when the optional hard disk is installed and is set to On for encryption.
*2
When this item is selected, Password and Re-enter Password need not to be specified.
IP Filter (IPv4)
Purpose:
To specify the IP address and subnet mask to be permitted or denied access to the printer.
Values:
Access List
Address
Address Mask
Active Mode
Copy Printer Settings
The Copy Printer Settings menu includes the Copy Printer Settings and Copy Printer Settings Report pages.
Copy Printer Settings
Purpose:
To copy the printer settings to one or more of the same model of the printer.
To copy the settings to another printer, specify the IP address and password of the printer to which the settings are
copied in the IP Address text box and Password text box. Then, click the Copy the settings to the Host in the above
list button. Copying the settings is complete. The connection time-out period is 60 seconds. After that, you can
check whether the settings were copied to this page. And you need to check the Copy the settings to the Host in the
above list and reboot the printer menu of the Dell Printer Configuration Web Tool in the destination printer to
verify if the settings were actually copied or not.
Select the check box to enable IEEE 802.1x authentication.
Selects the authentication method to use for IEEE
802.1x authentication.
EAP-MS-
CHAPv2
PEAP/MS-
CHAPv2
*1, 2
EAP-TLS
Sets the login name (device name) for IEEE 802.1x authentication using
up to 128 alphanumeric characters.
Sets the login password for IEEE 802.1x authentication using up to 128
alphanumeric characters.
Confirms the set login password.
Select the check box to enable Certificate Validation.
Sets the IP addresses that are permitted or denied access to the printer. Enter a
numeric value between 0 and 255 in each field.
Sets the subnet mask that are permitted or denied access to the printer. Enter a
numeric value between 0 and 255 in each field.
Reject
Rejects printing from specified network address.
Accept
Permits printing from specified network address.
Off
Disables the IP Filter feature for the specified IP address.
Dell™ Printer Configuration Web Tool
167
Need help?
Do you have a question about the C3760dn Color Laser Printer and is the answer not in the manual?