Dell C3760dn Color Laser Printer User Manual page 56

5 Select Advanced, and then select a connection method from WPS-PBC, WPS-PIN, Operator Panel, Ethernet
Cable, or Dell Printer Configuration Web Tool.
For Ethernet Cable:
Select Ethernet Cable, and then click Next.
a
Follow the on-screen instructions to configure wireless settings, and then click Next.
The Advanced Configuration Tool starts.
Select the printer, and then click Next.
b
Wireless Network Settings screen appears.
NOTE:
If the printer is not listed, click Enter IP Address and enter the IP address of your printer, and then click OK.
Set the wireless network settings, and then click Next.
c
IP Address Settings screen appears.
NOTE:
For details on each item, see "Assigning an IP Address."
Set the IP address settings of the printer, and then click Next.
d
Confirm the settings screen appears.
Confirm the settings, and then click Apply.
e
Complete configuration screen appears.
Click Next.
f
For WPS-PBC, WPS-PIN, Operator Panel, and Dell Printer Configuration Web Tool, follow the on-screen
instructions to configure wireless settings.
To configure wireless settings without using the video instructions, see the following instructions.
WPS-PIN
The PIN code of WPS-PIN can only be configured from the operator panel.
NOTE:
WPS-PIN (Wi-Fi Protected Setup-Personal Identification Number) is a method to authenticate and register devices
required for wireless configuration by entering PIN assignments to a printer and computer. This setting, performed through an
access point, is available only when the access points of your wireless router supports WPS.
1 Press the (Menu) button.
2 Press the
button until Admin Settings is highlighted, and then press the
3 Press the button until Network is highlighted, and then press the
4 Press the button until WPS Setup is highlighted, and then press the
5 Ensure that PIN Code is highlighted, and then press the
6 Write down the displayed 8-digit PIN code or select Print PIN Code. The PIN code is printed.
7 Ensure that Start Configuration is highlighted, and then press the
8 Ensure that the message Please wait WPS Setting is displayed, and enter the PIN code displayed on step
6 into the wireless LAN access point (Registrar).
NOTE:
For WPS operation on the wireless LAN access point, refer to the manual supplied with the wireless LAN access
point.
9 When the WPS operation is successful and the printer is rebooted, wireless LAN connection setting is completed.
54
Installing Optional Accessories
(Set) button.
(Set) button.
(Set) button.
(Set) button.
(Set) button.