Dell C3760dn Color Laser Printer User Manual page 140

PCL Fonts List
PCL Macros List
PS Fonts List
PDF Fonts List
Job History
Error History
Print Meter
Color Test Page
*1
Stored Documents
*1
This item is available only when RAM Disk is enabled with the optional 512MB memory module installed or the optional hard disk is
installed.
Printer Settings
The Printer Settings tab includes System Settings, Network Settings, USB Settings, PCL Settings, PostScript
Settings, PDF Settings, Secure Settings, and USB Direct Print Defaults pages.
System Settings
Purpose:
To configure the basic printer settings.
Values:
Power Saver Time - Sleep
Power Saver Time - Deep Sleep
Power Saver Time - Auto-Off Timer
mm / inch
Control Panel Tone
Invalid Key Tone
Machine Ready Tone
Job Completed Tone
Fault Tone
Alert Tone
Out of Paper Tone
Low Toner Alert Tone
Auto Clear Alert Tone
138
Dell™ Printer Configuration Web Tool
Click Start to print the PCL (Hewlett-Packard Printer Control Language) Fonts List.
Click Start to print the PCL Macro List.
Click Start to print the PS Fonts List.
Click Start to print the PDF Fonts List.
Click Start to print the Job History report.
Click Start to print the Error History report.
Click Start to print the Print Meter report.
Click Start to print the Color Test Page.
Click Start to print the Stored Documents list.
Sets the time taken by the printer to enter Sleep mode after it finishes a job.
Sets the time taken by the printer to enter Deep Sleep mode after it has
entered Sleep mode.
*1
Sets the time taken by the printer to be turned off after it has entered Deep
Sleep mode.
Sets the measurement unit to be used on the LCD panel as either mm or
inches.
Sets the volume of the tone that is emitted when the operator panel input is
correct, or disables the tone.
Sets the volume of the tone that is emitted when the operator panel input is
incorrect, or disables the tone.
Sets the volume of the tone that is emitted when the printer becomes ready,
or disables the tone.
Sets the volume of the tone that is emitted when a print job is complete, or
disables the tone.
Sets the volume of the tone that is emitted when a job ends abnormally, or
disables the tone.
Sets the volume of the tone that is emitted when a problem occurs, or
disables the tone.
Sets the volume of the tone that is emitted when the printer runs out of
paper, or disables the tone.
Sets the volume of the tone that is emitted when the toner is low, or
disables the tone.
Sets the volume of the tone that is emitted 5 seconds before the printer
performs auto clear, or disables the tone.